mt1000-otdr

MT1000 – Multifunction Digital Tester

Sku: DT-mt1000

Quick Overview

Today’s communication networks are becoming more and more sophisticated as leading network operators install new technologies like OTN, MPLS-TP and Ethernet in their metro and mobile backhaul networks as well as eCPRI/IEEE1914.3/CPRI/OBSAIUPDATED in mobile fronthaul networks. In some cases, operators must also support Fibre Channel links, while still keeping legacy technologies like SDH/SONET and PDH/DSn operational. The Network Master Pro MT1000A redefines the direction of future test platforms by bringing these network test requirements to a portable device, making it the ideal tool for field testing.

Categories : DIGITAL TESTERS

The compact, battery-powered and easy-to-use Anritsu MT1000A with Transport Module MU100010A/MU100011A has everything in a single, handy tester needed to install and maintain communication networks from 1.5 Mbps to 100 Gbps.

Metro and core networks OTN installation and maintenance
OTN up to OTU4 including mapping of Ethernet, CPRI, Fibre Channel,
SDH/SONET client signals, multistage mapping and FEC (Forward Error Correction)
Testing and verification of new OTN functions: ODU0 and ODUflex
Carrier Class Ethernet installation and troubleshooting
Ethernet up to 100 GigE including RFC 2544, RFC 6349 and Y.1564 testing
Ethernet OAM up to 100 GigE
MPLS-TP and PBB up to 10 Gbps
Mobile backhaul installation and verification
Synchronous Ethernet up to 10 GigE (ITU-T G.826x)
Time/Phase error measurement (ITU-T G.8265.1, ITU-T G.8275.1) (with High Performance GPS Disciplined Oscillator MU100090A)
Mobile fronthaul installation and verification
eCPRI/ IEEE1914.3 testing up to 100Gbps UPDATED
CPRI testing up to 10.1376 Gbps
OBSAI testing up to 6 Gbps
Powerful Storage Area Networking (SAN) testing
25G Ethernet
Fibre Channel up to 16 Gbps
Quick and easy testing of SDH/SONET and PDH/DSn networks
SDH/SONET up to STM-64/OC-192
PDH/DSn (E1, E3, E4, DS1, DS3)
Optical connector inspection and reporting to ensure network quality
IEC61300-3-35 based PASS/FAIL
OTN Testing with Client SignalsOTN Testing with Client Signals
The MT1000A is a powerful and full toolset for testing OTN signals. It supports complete Bit Error Rate (BER) tests with bulk signals at the OTN level as well as tests all the way to the Ethernet, CPRI, Fibre Channel and SDH/SONET client signals mapped into the OTN signal.

Easy-to-useEasy-to-use
The portable, compact, lightweight MT1000A makes network field testing easy. Service engineers can read and interpret data from the tested network directly on the 9-inch color display with easy-to-understand indications and graphical symbols. And the GUI makes it simple to configure and operate the instrument at its full potential.

Dual Port at All Rates

Reduced test time by testing two lines simultaneously with one unit
In-service bi-directional troubleshooting
IMAGES

Additional information

Weight 20 kg
Dimensions 20 × 20 × 20 cm
Top